Once rebooted after installation I visited the IP of the server at port 8006. Unable to connect. Now what?
SSH does answer, a quick search for ‘proxmox installation complete no answer on 8006’ turned up someone without pve-manager installed. I did have it installed, but did not see proxmox repositories in /etc/apt/sources.list.
Servethehome has a checklist for proxmox 6, I took the pve-no-subscribtion repository from there:
deb http://download.proxmox.com/debian buster pve-no-subscription
Apt update complains about missing keys for jessie. Not a problem for my installation as such, but might break something that does not expect warnings (even a simple apt update && apt upgrade -y will halt), so add the key:
# wget http://download.proxmox.com/debian/key.asc http://download.proxmox.com/debian/key.asc Resolving download.proxmox.com (download.proxmox.com)... 2a01:7e0:0:424::249, 126.96.36.199 Connecting to download.proxmox.com (download.proxmox.com)|2a01:7e0:0:424::249|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1703 (1.7K) [application/octet-stream] Saving to: ‘key.asc’ key.asc 100%[===========================>] 1.66K --.-KB/s in 0s # apt-key add key.asc OK
Retrying the web interface. Still no go: “the connection was reset”. Hmm… That is no ‘not found’, should I perhaps take the trouble of manually pointing at the https-protocol? Yes, that did it, add https:// in front of the IP and log in.
Shiny interface, just like in the screenshots 🙂
The summary view in the second-level tree-menu will stay active while clicking through the first-level tree-menu on the left hand, with the datacenter and node list. It shows different statistics and in a different representation (meters or graphs), depending on the subject, which is helpful in recognizing and remembering what I am looking at.
I now realize that I do have close to 30GB of space for the basic install (my 15GB * 2 for copies = 2), but no separate partition for /var. I’ll let it be, keep an eye on the level of free space and add space when needed. Reinstalling based on Debian Buster is well-documented, but with no experience with proxmox I’ll keep the installation close to default.
To see how much of the assigned space is used in which way, I compared the different views and some relations are not directly clear to me. I expected around 30GB at some level, and 15GB at another. What I actually see, is:
- Bare sectors, fdisk: 61863937 * 512 ~ 29,5 GB
- At ‘datacenter’ level: 2.2GB of 54.0GB used
- At node level: 2.2GB of 28.0GB used
- Two storage objects:
- local: 2.2GB of 28.0GB used
- local-ZFS: 0 of 25.8GB used
I can see the relation between 28 and 54, and between 28 and 25.8, but not between 54GB on the datacenter and 29.5GB actual usage on disk.
After defining ‘copies = 2’, I had expected all downstream values to be half of what I see here. Some thinking further: is the read value of fdisk is inside the node, not on the actual hardware? Then I would not see the total size of the SSD. I posted a question on the proxmox-forum, awaiting moderation and a reaction.